ilovefuzz.com

Jero wrote:

hazefuzz wrote:what's the name of the chip???

Think they use cd4049's

MC1404BCP

Anyone loading these kits into a smaller enclosure?

I'm jonesing for a small(er) box version of this.

It could definitely fit in a 125B

i ordered one that I'm going to put inside a 125B enclosure.

I'm gonna put my cock in a 125b.......errr....nm.

Tanx yous Aen for your Judo chops, Karate kicks, and 100 years of superfunktoan.

Here's Sonidero's that I rehoused for him a while ago


Yes, that's a 125b for those who were considering it. The board holds itself in place very nicely.

^ cool! I love the "pain" knob

Officer Bukowski wrote:^ cool! I love the "pain" knob

Thanks! It actually says "gain." Just in lowercase silly font.

ok, please gimme a hand here... powers up, LED works fine, signal goes through fine in bypass, activate the pedal with volume wherever and all three others fully clockwise, makes a nasty signal of its own but isn't processing / letting the guitar through. can't find any dry sockets or anything touching anything it shouldn't be. might just be missing that, but having gone through this whole thread in comparison i kind of doubt it. maybe i got the wrong chip too? sorry for the shitty gigantic iphone pics... let me know if you hate that & want them sized down, thought i should leave it alone for as detailed a look as possible.

As far as I can tell, you've got it all wired up right there space6oy. Doesn't look like the IC is marked so I can't tell if it's the right one, but you've got it oriented properly, and your switch/board look good.

the lower left lug on the 3pdt switch should be solder to the upper middle lug.

fuzzmax wrote:the lower left lug on the 3pdt switch should be solder to the upper middle lug.

It is already

yup. thanks jero, good eye. have successfully assembled x0xb0x, shruthi-1, 4ms modules & thingamagoop before this...

PM me the kind of chip you got. How long ago did you order this?

We will get it sorted...