Moderator: Ghost Hip
DRodriguez wrote:I can think up a scheme using a 3pdt as the toggle and a 4pdt momentary for the toggle switch.
Wire up the 3pdt like a normal bypass switch, but
Switch pins 1,3 and 4,6 with the 4pdt.
DRodriguez wrote:
This is how I'd wire it
Seten wrote:Thanks so much! If I wanted to add a feedback control on a switch with a knob to control amount is this all I would need to do? I'm a little confused because every schematic I've seen for a feedback looper doesn't connect the return tip directly to the spdt switch but rather to the lug on the stomp switch that is connected to the return jack when the switch is engaged. I can't think of why you would do this.
eatyourguitar wrote:Seten wrote:Thanks so much! If I wanted to add a feedback control on a switch with a knob to control amount is this all I would need to do? I'm a little confused because every schematic I've seen for a feedback looper doesn't connect the return tip directly to the spdt switch but rather to the lug on the stomp switch that is connected to the return jack when the switch is engaged. I can't think of why you would do this.
yeah you might find a feedback looper that is wired that way. the return jack is usually coming out of some delay pedal that is next to the feedback looper. the send jack is usually the input of a delay or a pedal board. the return is also wired to the output of the feedback looper. and the input of the feedback looper is wired to the send. so when you press that switch all the shit is connected to all the other shit directly with copper wires 4 ways party time.
you can put the 500KB feedback pot on either side of the footswitch. it makes no difference. if you want a master volume on the feedback looper you can just stick it before the feedback looper output jack tip. if you want true bypass of the volume knob then that is a whole thing on top of a thing.
BetterOffShred wrote:You would want it with lug 1 to ground, lug 2 from the jack, lug 3 to the switch. If I get your meaning
Seten wrote:BetterOffShred wrote:You would want it with lug 1 to ground, lug 2 from the jack, lug 3 to the switch. If I get your meaning
yeah, im referring to how eatyourguitar said that if i wanted true bypass on the volume knob that would be a whole thing on top of a thing. wouldnt the volume knob be bypassed when the loop is bypassed if it were along the blue wire aka how you described it?
Users browsing this forum: No registered users and 8 guests