boring topic: expression pedals



Moderator: Ghost Hip

Re: boring topic: expression pedals

Postby friendship » Wed Dec 03, 2014 8:51 pm

I traded an SD-1 for an EV-5 once and that's the one I've used ever since. It's cool.
sound journal

actualidiot wrote:12-bit's almost analog, right?
friendship

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 4116
Joined: Sun Mar 10, 2013 5:22 pm

Re: boring topic: expression pedals

Postby doommeow » Sat Dec 06, 2014 4:57 pm

I’m late to the party on this but…

I hate crappy cheap plastic expression pedals. ALL of the Boss pedals, the Line 6, the older Moog (haven’t tried the new ones), various Boss/L6 wannabes, the M-audio - hate em.

But there are some good cheap plastic expression pedals. Top of the list - Yamaha FC7. Rugged as hell. I’ve got two, one of which I’ve been banging on for 7? years. Easy to board mount if you want, nice rubber grip for your foot, wide throw. Only minor complaint - cable is hardwired, I prefer detachable.

Then there’s the Behringer. Most of their stuff is hit or miss or outright garbage. IME, the expression pedal is the exception. I’ve had three, never had one fail - either out of the box or after years of abuse - can’t say that about any other Behringer product I’ve used. It’s not just a clone of the Yamaha, it’s arguably better for some people. Build from a lot of the same molds, but you’ve got the option of running active or passive, stereo/mono, EXP/vol, cable isn’t hardwired etc. I’ve got and use both but still slightly prefer the Yamaha strictly for feel, but it’s really minor.

With the switchable active circuitry, the Behringer isn’t electrically identical to the Yamaha, so it will behave somewhat differently with some other pedals - even if those other pedals say that the resistance or pot value of the expression pedal doesn’t matter. GB24 is a perfect example of this. Either the Behringer or the Yamaha will work, but the Behringer has a different range - which can be further tailored using the onboard ctrls. Not better or worse, just different.

Also worth KYEOing for, the Alesis expression pedal. OOP, but a masterpiece of the genre.
doommeow

User avatar
IAMILF
IAMILF
 
Posts: 2021
Joined: Fri Oct 04, 2013 3:37 pm

Re: boring topic: expression pedals

Postby blakestree » Sat Dec 06, 2014 5:43 pm

Saturnworks does some nice ones and will customize, too.

http://saturnworkspedals.com/shop/utili ... sion-pedal
While leaves shall fall, do branches intertwine, that we remain bound.

Blake's Tree
blakestree

User avatar
IAMILF
IAMILF
 
Posts: 2305
Joined: Fri Dec 05, 2014 3:36 pm
Location: Savannah, GA USA

Re: boring topic: expression pedals

Postby CBA » Fri Oct 30, 2015 12:16 pm

Expression
Last edited by CBA on Thu Nov 05, 2015 10:37 pm, edited 1 time in total.
CBA

User avatar
IAMILF
IAMILF
 
Posts: 2441
Joined: Sat Mar 06, 2010 11:46 pm

Re: boring topic: expression pedals

Postby rfurtkamp » Fri Oct 30, 2015 4:05 pm

The blunt answer is that Moog has always loved to be different (often for the sake of difference), and some companies didn't want to choose the "boring, big box" Roland?boss approach no matter how well it worked.

I wish there was a kinder answer but that's how it seems to be.

I remember when the EV-5 was the absolute standard, it was that or...nothing. Times were simpler then.
==
My pedalboard costs approximately 191 Metal Zones.

Image
rfurtkamp

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 5763
Joined: Thu Apr 14, 2011 1:27 am
Location: Idaho

Re: boring topic: expression pedals

Postby JonnyAngle » Fri Oct 30, 2015 5:11 pm

Mission Engineering Expressionator?
JonnyAngle

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 4233
Joined: Wed Feb 25, 2015 11:35 am

Re: boring topic: expression pedals

Postby CBA » Sat Oct 31, 2015 1:02 am

And yet...
Last edited by CBA on Thu Nov 05, 2015 10:37 pm, edited 1 time in total.
CBA

User avatar
IAMILF
IAMILF
 
Posts: 2441
Joined: Sat Mar 06, 2010 11:46 pm

Re: boring topic: expression pedals

Postby UglyCasanova » Sat Oct 31, 2015 1:21 am

I use the Moog, but I like how close to the ground the heel is on the RV-5s. Want to pick one up eventually.
UglyCasanova

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 12460
Joined: Mon Jul 28, 2014 6:47 am
Location: Norway

Re: boring topic: expression pedals

Postby rfurtkamp » Sat Oct 31, 2015 6:41 am

Ask each manufacturer what they developed it for.

That's really the only answer.
==
My pedalboard costs approximately 191 Metal Zones.

Image
rfurtkamp

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 5763
Joined: Thu Apr 14, 2011 1:27 am
Location: Idaho

Re: boring topic: expression pedals

Postby Dark Barn » Sat Oct 31, 2015 10:00 am

Buy my Line-6 expression pedal out of the B/S/T!

With the DL4 I can think of two possible issues you are having with the Moog. The DL4 has a strange protocol for setting the expression function and range that involves power cycling the DL4 while an expression pedal is plugged in, I don't know the exact protocol but if you haven't done it check the manual.

Im not sure if it is realistic to expect one expression pedal to work with everything, but the Line-6 expression pedal is 25k ohm and uses a TS connector, the Moog is 5Ok ohm and TRS. The knob on the Moog is open at full CW and tapers the pot value when you roll it back.

Your issues could be any of the above, afaik.
I've been searchin' for the dolphins in the sea.

The Weak in Review: Weak Arguments Revue
Dark Barn

User avatar
FAMOUS
FAMOUS
 
Posts: 1801
Joined: Mon Feb 06, 2012 5:12 am

Re: boring topic: expression pedals

Postby CBA » Sat Oct 31, 2015 11:36 am

And yet...
Last edited by CBA on Thu Nov 05, 2015 10:37 pm, edited 1 time in total.
CBA

User avatar
IAMILF
IAMILF
 
Posts: 2441
Joined: Sat Mar 06, 2010 11:46 pm

Re: boring topic: expression pedals

Postby rfurtkamp » Sat Oct 31, 2015 11:40 am

Yep, it's an annoying mistress at best.

I decided years ago that I'd just stick with the EV-5 as long as it did what I wanted (and it still does) on the majority of devices I want to use it on.
==
My pedalboard costs approximately 191 Metal Zones.

Image
rfurtkamp

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 5763
Joined: Thu Apr 14, 2011 1:27 am
Location: Idaho

Re: boring topic: expression pedals

Postby Dark Barn » Sat Oct 31, 2015 11:56 am

The Reflex is pretty awesome. I have 5 things connected to mine and everything is working great so far. Dip switches on bottom can make any of the expression ports into TRS, TS, or CV. Programming the hardware editor on the Reflex is a small hassle but not too bad, the promised software editor (and user created LFO waveform along with it) has been put on the back burner by Source Audio and who knows when it will see the light of day.
I've been searchin' for the dolphins in the sea.

The Weak in Review: Weak Arguments Revue
Dark Barn

User avatar
FAMOUS
FAMOUS
 
Posts: 1801
Joined: Mon Feb 06, 2012 5:12 am

Re: boring topic: expression pedals

Postby CBA » Sat Oct 31, 2015 12:49 pm

I'll try.
Last edited by CBA on Thu Nov 05, 2015 10:38 pm, edited 1 time in total.
CBA

User avatar
IAMILF
IAMILF
 
Posts: 2441
Joined: Sat Mar 06, 2010 11:46 pm

Re: boring topic: expression pedals

Postby rfurtkamp » Sat Oct 31, 2015 2:09 pm

I can say this much. It looks cheap. It feels..cheap.

But I'm a huge, mean guy. It survived 10 years of absolutely terrible gigs and touring, and another 10 past that. It looks like hell now...but it *still* works.
==
My pedalboard costs approximately 191 Metal Zones.

Image
rfurtkamp

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 5763
Joined: Thu Apr 14, 2011 1:27 am
Location: Idaho

PreviousNext

Return to General Gear



Who is online

Users browsing this forum: Google [Bot] and 14 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)



ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.