Let's see your PEDAL BOARD!

[Paul_C]

One day I'll find a way of taking better pictures, but for now this will have to do

My set up as of today, but no doubt it'll change over 2020 - I might even dig out stand #4 again.



pedal order:

Pixel*
Rubberneck (with Prism 9 in the loop)
Feedback Looper with Miku
Lida Machine
Hyperion II*
Komorebi
Happiness
Ghost Fax
Into The Unknown*
Rattle Crow*
CSIDMAN
Vitruvian Mod
BitQuest
Marshmallow
Colour Theory
Syntax Error

*built by me

[Dowi]

And with the cover of my patented Nerd Blocker off. 1590A pedals are a pain so I screwed these three to a big enclosure baseplate and then added a cover on standoffs to keep the settings from getting moved when going in and out of the case. These pedals are always on so I don't need to see or get to them. Thumbscrews for access when I need it

Yours is one of those boards I would love to try because I have absolutely no idea of how could it sound.
Love the super-clean look.

I think most people wouldn't be into the fact that its a LOT of stuff on a board that ends up not doing much if you don't write to the pedals. Like other than reverb and delay there is nothing that happens if you just turn pedals on and play. Most things are set for momentary functions for stabs of glitch and chaos.

However, based on listening to your record on Bandcamp I think you would definitely get along with it. This board is for covering bass and guitar sounds with just a drummer and a vocalist so you'd likely dig it.

i would totally dig it.
Also, i like to use a couple of pedals for extremely momentary effects, so i get what you're saying.

So, you have like, a pitchfork always on set to -1oct going to a bass amp or what?
I tried to do that with a microPOG but was totally not satisfied of the result.

[blackjaw]

[weebles]

Starting the new year right. That’s nice.

[adamajah]

That's all you need right there

[Paul_C]

first blurry picture of 2020 (I'm going to get a couple of cheap LED lamps to see if that improves things)

[blackjaw]

That's all you need right there

About as barebones as I can get!

[JM Charcot]

modulation and oscillation for 2020, waiting for a red panda particle v2 to complete the setup.

Consists of the organelle or any source ->
// Loop1 -> diamond compressor -> ehx freeze -> pitch fork -> eqd arpanoid -> sentimental bob tacana tremolo -> malekko bit reducer -> smallsound/bigsound tafm -> fairfield circuitry shallow water -> ss/bs mini
//Loop 2 -> zvex mastotron -> drolofx molecular disruptor -> strymon el capistan (sound on sound) -> boss dc-2w -> zoom ms70cdr -> eqd avalanche run

Loops come and go from the keith mcmillen k-mix, midi controlled by an evolution uc33e

[JonnyAngle]

9849492D-4BC5-4FA9-B6E9-D8D46146C5C1.jpeg (135.18 KiB) Viewed 3892 times

This is my dream rig. Frv-1>H9>#rip.>H9>cabzone LE>Fewtility one

The cabzone dry out goes to my amp
The rc3 has my backing tracks loaded on it and they’re sent to the ED100

I use the fewtility one to add other pedals for short periods, test pedals, and also use to run my headphone rig, which is an ehx headphone amp into some iems. When using iems I patch the rc3 into the fewtility one

E94DE6E9-936A-4D6D-8283-1C25F2E17AC4.jpeg (106.56 KiB) Viewed 3892 times

[dandy13]

Man I need a mini with top mounted jacks

[UglyCasanova]

Loving the Jwarish dual H9s, JA! That stack is way sick too!

[MechaGodzilla]

9849492D-4BC5-4FA9-B6E9-D8D46146C5C1.jpeg

frv1 first in chain is a bold move that i *TOTALLY* love

[ck3]

Today's lo-fi photo rendering of ye olde noodling corner board:

[JonnyAngle]

Frv-1 sounds bad just like a tank. When it’s last it just sounds like a wet blanket over everything. When it’s first, with a drive after it it sounds litAF.

I was able to abandon all other pedals with the dual h9s. First h9 has wah, whammy, a few delays, black hole and reverse reverb. The second one has flanger, chorus, black hole and a few delays as well. So much more manageable than the big board. Props to ck3 but I can’t handle that anymore!

[$harkToootth]

modulation and oscillation for 2020, waiting for a red panda particle v2 to complete the setup.

Consists of the organelle or any source ->
// Loop1 -> diamond compressor -> ehx freeze -> pitch fork -> eqd arpanoid -> sentimental bob tacana tremolo -> malekko bit reducer -> smallsound/bigsound tafm -> fairfield circuitry shallow water -> ss/bs mini
//Loop 2 -> zvex mastotron -> drolofx molecular disruptor -> strymon el capistan (sound on sound) -> boss dc-2w -> zoom ms70cdr -> eqd avalanche run

Loops come and go from the keith mcmillen k-mix, midi controlled by an evolution uc33e

I just saw this one. Big fan! Without hearing your choons... based off this... I am a big believer in whatever you are doing!