Let's see your PEDAL BOARD!

[behndy]

a very SPARTAN SETUP.

[Jwar]

More like negative bone. Wait, no that's not right. Mega bone. Boner even.

Tone is in the finger tips anyway. Everyone knows that.

[nshuman]

Some changes to the setup, some new pedals.

Whats the signal chain for any one of those?

I will post it later. They are all wired together, it's not such a crazy signal chain.

oh yeah this is totally normal

There simply can't be any tone left running through this. negative tone.

That setup has bypass pedals, great cables, 4 dedicated buffers, 2 line drivers, some always on buffer bypasses. The tone is the same through the board or direct in the amp. Just have to do it right.

[mathias]

They just jelly.

[nshuman]

with the amount of distance your signal runs through bypassed solderings on pedals who cares if you have great cables

to be serious though, i'd be super interested in hearing a recording of you going through all of this, then taking the cable from your guitar and going into the amp.

LOL It would be interesting for YOU to approximate cable runs, internal pedal wiring lengths, factor in bypass pedals/blenders/loopers that isolate longer chains. Calculate the effect of line drivers, buffers, etc. Then maybe calculate signal decay? Or, you know, whatever.

[Invisible Man]

FIGHT FIGHT FIGHT

And Jwar: tone is in the bonertip, doy.

[nshuman]

So, the signal chain is kind of simple and stays pretty short depending on what is or is not activated:

Top Level Chain:
Bass > SFX MicroThumpinator (HPF+Buffer) > Ploytune Mini 2 > SFX B3 > SFX Micro EQ (used as first line driver) > Broughton Broughctave > COG T-16 > SouthAMPTon Fifth Gear v2 > Broughton PowerStage > FEA DE-CL > H9 [Wounded Paw Blender V4 in effects loop] > Broughton Asure Skiez > Broughton JoshWah > CT5 > SouthAMPton Ictineo > Junction BOX > H9 > Broughton Archetype > Broughton Super Stack > Lehle DC Filter > SFX D][plomat > AMPS


---
Wounded Paw Blender v4 Chain:

A: CLean
B: Broughton Sentinel
C: Fairfield Barbershop > SFX Micro Red Dragon mk II > Broughton Azure Drive
D: Buffer Buster Ball Buster > SFX 42 > SFX Micro Fuzz > Broughton Pi > Broughton Sunder Fuzz v2 > Dunwich Volt Thrower > Broughton Bass Box > Cornish Buffer clone
---


Junction Box (bypassable) Chain:

Bypass Box > Board #3
---


Bypass Box Chain:
Cornish Buffer Clone > COG Grand Tarkin > SouthAMPTon Boosted Fuzz > Puhzing > MOOG Freqbox > Moog Ringmod > Moog LPF > MOOG Phaser > MOOG CLusterflux > MOOG Delay (104m) > MIDI MUrf > Back to Bypass Box

---

Board #3 (After bypass box but also in the junction box chain)

Cali76 G P > Hudson Broadcast > SOuthAMPTon All Things Equal v2 > Heinseberg > Broughton Transboost > Cornish buffer clone > Broughton AMplitude > Fairfield Accountant > Valve Caster v2 (higher voltage heaters) > Broughton Dunder Mufflin > Broughton PLL > Dunwich Wizard Fuzz > Broughton Terraformer > SGFX Imperial > MODEL 001 > FEA Photon Fuzz > DITTO > Beat Buddy > Broughton MONOBLOCK II > Broughton PHAETON > FEA DE-CL > Broughton HLPF > Broughton Studio One > Cali76 TX > SFX buffered splitter > back to junction Box.


I am probably forgetting stuff, but this is good enough.

[Somnambulance]

They just jelly.

[Somnambulance]

I need to rewrite my board.

[weebles]

They just jelly.

Accurate.

[nshuman]

I need to rewrite my board.

Yes

[Inconuucl]

a very SPARTAN SETUP.

It's a spartan set up because he has 300 pedals on his board.

[behndy]

a very SPARTAN SETUP.

It's a spartan set up because he has 300 pedals on his board.

HAH.

or, can hold off as many as he wants with his Three Hundy Noise Combos?

super pimper setup suh. seems well thought out and massive with potentialities.

lol. just. like. PLEASE tell me you don't lug all that to shows. i was DYING from one PT Pro board and a small second amp bugger board.

[nshuman]

a very SPARTAN SETUP.

It's a spartan set up because he has 300 pedals on his board.

HAH.

or, can hold off as many as he wants with his Three Hundy Noise Combos?

super pimper setup suh. seems well thought out and massive with potentialities.

lol. just. like. PLEASE tell me you don't lug all that to shows. i was DYING from one PT Pro board and a small second amp bugger board.

Shows? LOL This is all strictly for messing around at home. My kids can use the pedals to build their own boards when they get older.

[nshuman]

with the amount of distance your signal runs through bypassed solderings on pedals who cares if you have great cables

to be serious though, i'd be super interested in hearing a recording of you going through all of this, then taking the cable from your guitar and going into the amp.

LOL It would be interesting for YOU to approximate cable runs, internal pedal wiring lengths, factor in bypass pedals/blenders/loopers that isolate longer chains. Calculate the effect of line drivers, buffers, etc. Then maybe calculate signal decay? Or, you know, whatever.

uhm.. yeah, a recording of all of this, and then a recording without any of it?

You know, to see what the difference might be (if any)

Sure, if I felt like I owed some sort of proof to some stranger on the internet.