by autopilot » Tue Oct 09, 2012 9:03 pm
5 step CV sequencer. The 5 knobs set the voltage (0 to 5v) for each step, momentary switch sets the rate (tap tempo) that the sequencer will scroll through each step, toggles on the back select if the sequencer is 4 or 5 step, and the other
toggle is to select if the sequencer is controlled via the tap tempo rate or if it's manual (need to press the switch to move to the next step). Jack on top of the layout is for external source (box with 3 switches) so i can have independent tap, external reset the sequencer to have some pseudo longer steps (return to the 1st step if i'm in step 3 instead of going to step 4 example) and independent control of the manual scroll, 3 jacks on the side are the outputs wired so it transmit the cv info, tap info (to sync the devices and only tap in one place). The idea is to use it mostly with the broadcast, polypus and gyroscope (all 3 modded to accept cv control for the ratio and external tap sync) to control the ratios/rates (for rhythmic patterns) and to sync them all with the same tap. Some of the features were done to satisfy my exact needs (going for a pseudo modular-esque pedalboard control)
- Attachments
-